728x90 공학(Engineering)3 [기계공학] Tap에 대해서 (Updated: 2024-01-10) 1. Tap size Tap size는 크게 Tap을 구성하는 thread의 직경, thread 간의 간격으로 정해진다. 이때, 각각의 크기들은, metric, fractional, 혹은 screw의 크기로 표시가 된다. metric은 주로 밀리미터를 기준으로 표시가 되며, fractional(or Unified)은 인치(inch)를 기준으로 표시가 된다. 또한 metric 표기의 경우, 탭 크기 앞에 M을 넣는다. a. Tap 크기의 표기 방법: "Thread의 크기"-"thread 간격" 1) Thread 크기: 내부 혹은 외부 thread의 가장 큰 간격 2) Thread 간격: 두 인접한 thread 간의 간격 Unified Metric Thread 크기 a.. 2024. 1. 11. [Engineering] 유용한 사이트 1. dig-key https://www.digikey.com/ 2022. 2. 27. [Circuit] RF Mixers Where is an RF mixer? 1) a general description of RF mixers 2) consisted of three passive ports or active devices that can modulate a signal. a. RF input port (R) b. Intermediate frequency output port (I) c. Local input port (LO) 3) The purpose of RF mixers a. changing the frequency of an electromagnetic signal with conserving other quantities (amplitude and phase) from the initial signal - i.e... 2022. 2. 25. 이전 1 다음 728x90